PRODUCT

CONTACT US

Rugao Tongda Machinery Manufacturing Co., Ltd.
Add.:No. 64, Shili Road, Rucheng Street, Rugao City, Jiangsu Province,China
Contact:Mr. Zhu
Tel:0513-87625525
Fax:0513-87635595
Mob:13806274600
E-mail:zhuhao365@163.com

What should be paid attention to when using vacuum kneading machine?

What should be paid attention to when using vacuum kneading machine?
1. After the vacuum kneading machine is installed, first clean, decontaminate and wipe the anti-rust grease. Check each lubrication point and inject lubricant (fat).
2. Check the tightening of the V-belt before driving, and move the motor to the appropriate position by adjusting the bolt.
3. Check if the fastener is loose, if the steam pipe leaks, and whether the circuit and electrical equipment are safe. Electric heating type kneading machine must have grounding device
4. Clean the vacuum kneading machine room before the test, and run for 10-15 minutes to confirm that the machine is running normally and then put into production. Usually, the new machine gear (including the reducer) has a large noise at the initial use, and naturally decreases when it is to be engaged for a while.
5. When using steam to warm, the inlet pipe should be equipped with safety valve and pressure gauge, and the steam pressure should not exceed the pressure requirement of the mixing tank of the sign knowledge.
6. When mixing and kneading, reduce the use of reversal; each lubricating part should be filled with oil frequently; there should be no leakage of raw materials in the sealing part of the wallboard.
7. The belt is tight and suitable for regular inspection and adjustment.
8. The steam pipe is not allowed to leak. When the machine is stopped, the valve should be closed and the reliability of the safety valve pressure gauge should be guaranteed.

HOME
TEL
SMS
CONTACT